(Created page with "== Installing and running Piaware == === Intro === A little fun project using a Raspberry Pi Zero W and a DVBT stick running the flightaware software. Make sure (if it is y...") |
No edit summary |
||
| Line 58: | Line 58: | ||
Login to your wifi router and check for the newly added addres<br> | Login to your wifi router and check for the newly added addres<br> | ||
Make sure it is broadcasting 802.11n as the Raspberry Pi does not support other protocols<br> | Make sure it is broadcasting 802.11n as the Raspberry Pi does not support other protocols<br> | ||
=== Enable SSH === | |||
In the bot folder create a file called ssh<br> | |||
<code> | |||
/boot# touch ssh | |||
</code> | |||
Reboot the Raspberry. ssh will become available after the restart<br> | |||
You can login with<br> | |||
<pre> | |||
user: pi | |||
pass: flightware | |||
</pre> | |||
Change the password to a better one as it is a default<br> | |||
Revision as of 23:02, 14 May 2020
Installing and running Piaware
Intro
A little fun project using a Raspberry Pi Zero W and a DVBT stick running the flightaware software.
Make sure (if it is your first) to have a set including connectors and a poweradaptor with 5.1v output.
If you plan for a mobile setup, make sure the powerbank provides the 5,1v output.
Since i'm on a budget i start out with the Raspberry Pi Zero W
Getting started
Put the Raspberry together, much like lego.
Download the software from flightaware
wget http://piaware.flightcdn.com/piaware-sd-card-3.8.1.img.zip
Unzip the file and cd into the piaware-sd-card-3.8.1.img folder (yes it is a folder..)
First check for your SD card
lsblk
Mine seems to be /dev/mmcblk0 device which is mounted at /media/phenixops/disk
mmcblk0 179:0 0 15G 0 disk └─mmcblk0p1 179:1 0 15G 0 part /media/phenixops/disk
Make sure the card contains NO files, they will ALL BE LOST WHEN YOU CONTINUE!
From the folder, copy the image to the card using dd
phenixops@phenix:/home/phenixops/Downloads/piaware-sd-card-3.8.1.img# dd bs=4M if=piaware-sd-card-3.8.1.img of=/dev/mmcblk0 conv=fsync
Configuring the Wifi
After the image has been copied (you might have to reseat the SD card) you can edit the configuration to enable wifi
Edit the piaware-config.txt file you will find on the sdcard
vi piaware-config.txt
Change the part with the wireless-ssid and wireless password to what goes for your network
wireless-ssid YourSSID wireless-password Blablabla
(Make sure you enter the details of your phone's hotspot if you want to take it outside..)
Next pop out the SD card and put it into the Raspberry Pi
Checking the network
Login to your wifi router and check for the newly added addres
Make sure it is broadcasting 802.11n as the Raspberry Pi does not support other protocols
Enable SSH
In the bot folder create a file called ssh
/boot# touch ssh
Reboot the Raspberry. ssh will become available after the restart
You can login with
user: pi pass: flightware
Change the password to a better one as it is a default